The BMW E21 is the first generation of the BMW 3 Series compact luxury vehicle and was produced from June 1975 to 1983. It was initially available as a 2-door sedan, to replace the 02 Series. At launch, all models used carburetted 4-cylinder engines, however fuel injected models were introduced in late 1975 and 6-cylinder engines were added in 1977. A cabriolet body style - manufactured by Baur - was available from 1978 to 1981.
The E21 was replaced by the E30 3 Series in 1982.
Maps, Directions, and Place Reviews
Development
Under the direction of its 51% percent shareholder, Herbert Quandt, BMW decided upon a replacement for their aging 02 Series. Paul Bracq, Director of Design at BMW from 1970 to 1974, is credited with setting the design direction of the E21.
In July 1975, BMW's Board of Management introduced the 3 Series to the public at the Munich Olympic Stadium.
Blue Bmw 320i Video
Design
The frontal view of the new car was dominated by the BMW trademark kidney grille standing out clearly from the radiator cover. The styling of the new car bore a resemblance to the BMW E12 5 Series.
The wedge shape of the two-door model was distinctive, extending all the way to the unusually high rear end. In response to criticism of the tail design, a black plastic trim panel between the tail lights was added. Like many other BMW models, the C-pillar of the E21 features a Hofmeister kink.
The cockpit design of the E21 marked the introduction of a new design concept, with the center console and central dashboard area angled towards the driver. This feature has become part of BMW's interior design philosophy for many years. As a sign of passive safety, all edges and control elements within the interior were rounded off and padded.
Engineering
Measuring 4,355 mm (171 in) long, 1,610 mm (63 in) wide, and 1,380 mm (54 in) high, the E21 continued the tradition of the New Class 2-door sedan models. With the wheelbase measuring 2,563 mm (101 in), there was little body overhang in the rear-wheel-drive design. The track measured 1,364 mm (54 in) at the front, and 1,377 mm (54 in) at the rear.
The suspension incorporated rack and pinion steering and MacPherson strut suspension at the front, and semi-trailing arm type independent suspension at the rear. The rear suspension design causes camber changes, which can introduce "snap oversteer" at the handling limits. The power assisted brakes were discs on the front wheels, while the rear wheels had drum brakes (except the 323i model which had discs all round).
Initially, a Getrag four-speed manual was the standard transmission fitment. Five-speed overdrive Getrag gearboxes were fitted as standard in 1980, but close ratio 'sport' gearboxes were available at the car's release as an option. Alternatively, purchasers could opt for the ZF 3 HP-22 three-speed automatic transmission.
Models
315
The 315 was the base model for years 1981 to 1983. It accelerates to 100 km/h in 14.8 seconds and has a top speed of 154 km/h (96 mph).
316
This 316 was the base model for years 1975 to 1981. It accelerates to 100 km/h in 13.8 seconds and has a top speed of 160 km/h (99 mph).
In 1980 the engine size increased to 1.8 litres, however the model remained badged as 316. Acceleration to 100 km/h was reduced to 12.5 seconds and top speed increased to 167 km/h (104 mph).
318
The 318 was a mid-range model. It accelerates to 100 km/h in 11.9 seconds and has a top speed of 165 km/h (103 mph).
318i
In 1980, the carburetted 318 was replaced by the fuel injected 318i. It accelerates to 100 km/h in 11.5 seconds and has a top speed of 173 km/h (107 mph). In Sweden, the 318i was badged 320i and had twin headlights.
320
The 320 was a mid-range model, powered by a 2.0 litre engine using a Solex 2-barrel downdraft carburettor. It accelerates to 100 km/h in 11.2 seconds and has a top speed of 170 km/h (106 mph).
320i
The 320i was released in late 1975. It accelerates to 100 km/h in 9.9 seconds and has a top speed of 182 km/h (113 mph).
US models are fitted with a thermal reactor as a pollution control device. The 2.0 litre US model (1977-1979) accelerates to 100 km/h in 10.5 seconds and has a top speed of 165 km/h (103 mph). The 1.8 litre US 320i and 320is models (1980-1983) accelerate to 100 km/h in 11.1 seconds and have a top speed of 169 km/h (105 mph).
320/6
The 320/6 replaced the 320i. It uses a six-cylinder engine with a Solex 4-barrel downdraft carburetor. It accelerates to 100 km/h in 10.0 seconds and has a top speed of 180 km/h (112 mph).
323i
The 323i was the top E21 model following its introduction in 1979. It is powered by a 2.3 litre six-cylinder engine using K-Jetronic fuel-injection. It accelerates to 100 km/h in 8.7 seconds and has a top speed of 200 km/h (124 mph).
North American models
The E21 was sold in the United States from model years 1977 to 1983 as the 320i and 320is. Six-cylinder models were not sold in America, because the E21 versions of the M20 engine did not meet U.S. emissions regulations at the time.
Due to American regulations, the following changes were required:
- larger front and rear "diving board" bumper bars
- sealed beam headlights, larger indicator lights and side reflectors
- speedometer in miles-per-hour
- fuel gauge markings changed from litres to "full, ½, reserve"
- a detuned version of the M10 engine, initially using a thermal reactor to control exhaust emissions
- in 1980, the engine was downsized from 2.0 L to 1.8 L and the thermal reactor was replaced with a catalytic converter.
Model year changes
At the E21's release, three models were available: with 316 (1.6-litre), 318 (1.8-litre) and 320 (2.0-litre) versions of the BMW M10 4-cylinder engine. To differentiate between models, the 320 model came with dual headlights, while the 316 and 318 had single headlights.
1975
The fuel-injected 320i was introduced at the end of 1975. It featured the M10 4-cylinder engine with Bosch K-Jetronic fuel injection, and a limited slip differential was available as an option.
1977
At the 1977 International Auto Show in Frankfurt, BMW unveiled its new variants of the E21, featuring the new straight-6 M20 engines (which were initially called "M60").
The 4-cylinder 320 model was replaced with the 320/6, featuring a 2.0 litre version of the M20 engine. The new range-topping 323i model was introduced, featuring 2.3 L with 105 kW (141 hp), which gave the 323i a top speed of 200 km/h (124 mph). The braking system was also upgraded, with the 323i featuring disc brakes on all wheels. Options include power steering, a 5-speed close-ratio 'dogleg' sport gearbox, and 25% limited slip differential.
1980
For the 1980 model year, the four-cylinder models were upgraded: the 1.8 L carburetted M10 unit was revised to produce 66 kW (89 hp) and entered the market in the updated 316, while a fuel-injected version of the 1.8 L M10 was introduced in the 318i model (which replaced the carburetted 318 as the mid-range model). This fuel-injected 1.8 L M10 was also sold in Sweden with 320i badging (with a higher level of standard equipment to distinguish it from the 318i), because the 320/6 was never certified for sale there.
The 320is model (US only) was released in 1980 using a 1.8 litre version of the M10. The "S Package" featured Recaro sport seats, upgraded suspension components that included a rear anti-roll bar and a larger front anti-roll bar, a 5-speed transmission and limited-slip differential, cross-spoke alloy wheels, a larger and more extensive tool kit, a dual operation manual sunroof, an AM/FM Blaupunkt radio with cassette player, fog lights, a 3-spoke leather-wrapped steering wheel and leather shift knob, a front air dam, a "delete" of the alphanumeric 320i markers on the rear trunk lid and a limited color palate of white, silver or black. Just 2,500 320is's were produced.
1981
The economy model 315 was introduced as a reaction to the second "oil crisis" in late 1979. More spartan than the other E21 models, it was the last E21 to be built and produced alongside the early E30 models.
Baur cabriolet
A cabriolet conversion was offered by Karosserie Baur GmbH, based on regular E21 models. The cabriolet conversion was composed of a targa roof and an independent rear soft-top. Production of the Baur TopCabriolet began in 1978, and were sold via the BMW dealership network.
All TopCabriolets included the BMW warranty. A total of 4,595 vehicles were manufactured before production ended in 1981.
Motorsports
The Group 5 version of the BMW 320, introduced in 1977 as a replacement to the already obsolete BMW 3.0 CSL and became nicknamed as the Flying Brick in reference to the blocky bodyshape, was powered by a Formula Two engine that was tuned to 225 kW (306 PS) by BMW Motorsport. The car was developed in only just over 12 weeks, without technical drawings. BMW Motorsport engineers simply carried out the modifications directly, with the car progressively taking its final shape.
Other than the main factory team and McLaren who ran the IMSA operation in the US, the car was notably used by the BMW Junior Team, who had the likes of Manfred Winkelhock, Eddie Cheever, and Marc Surer as drivers. They would help to win the 1977 Deutsche Rennsport Meisterschaft and would later go into Formula One. The 320 won its first race, at Zolder in 1977 with Surer at the wheel.
The car was also used to win the Macau Guia Race in 1981 and 1982.
Further reading
- Jeremy Walton (2001). BMW 3-Series Collectors Guide: Generation 1 and 2 including M3. Motor Racing Publications. ISBN 1-899870-55-5.
- R.M. Clarke (1990). BMW Series 3 - 4 Cylinder Cars Gold Portfolio. Brooklands Books. ISBN 1-85520-149-6.
Source of the article : Wikipedia
EmoticonEmoticon